Cult modern

N° 500L White

Matt lacquer

The main feature of this finish is the silk-effect surface obtained by applying two coats: a basecoat and a lacquered finishing coat. Available in the colours shown below and in RAL and NCS sample colours.

N° 500S White

Soft Touch

This is a clear, matt, reflection-free finish applied to lacquered surfaces. It feels very soft and is extremely resistant to scratches and to yellowing. The clear, soft touch finish is applied after the surface has been lacquered in the desired colour. Available in the colours shown below and in RAL and NCS sample colours.

Colours available

N° 500 White
N° 3376 Moon
N° 3416 Ecru
N° 3384 Hemp
N° 3405 Powder
N° 3383 Rope
N° 3155 Earth
N° 3849 Cream
N° 3851 Turtledove Grey
N° S6010/Y30R Beige-Grey
N° 3095 Grey
N° 3274 Smoky Grey
N° S4000-N Concrete
N° S7000-N Lead
N° 3824 Grey
N° 3162 Grey
N° 3066 Grey
N° S5010-G10Y Moss
N° S6010-R10B Plum

N° 33P Sand

Paint-brushed

What distinguishes this finish is the “paint brush strokes” effect surface created by skilfully applying a patina by hand with a brush over the lacquered finish. It is achieved in four steps: a basecoat, a lacquer finish, a coat of patina, sealing of the patina.

Colours available

N° 34P Yellow
N° 35P Blue
N° 31P Green
N° 32P Pink

N° 60F Enamel

Fabric Effect

This finish creates a “combed fabric" effect that can be felt. it is achieved by using a brush to create a special “combed fabric” effect on the lacquer. Various coats of lacquer are applied and then removed from the edges, the raised parts and the frames to created an “aged” effect. It includes six steps: basecoat, lacquered finish, a coat of special fabric-effect lacquer, combing, aging, final coat of fixing varnish.

Colours available

N° 61F String
N° 62F Rain
N° 63F Ribbon
N° 64F Turtledove grey
N° 65F Cloud

N° 500L White

Open-pore lacquered ash

This finish is made from matt, water-based paint that reveals the beautiful, underlying ash wood grain. It requires three coats: a basecoat, a coat of lacquer and a lacquered finishing coat. Available in the colours shown below and in RAL and NCS sample colours.

N° 3383/DTN Rope

Open-pore Talc-finish ash

The special feature of this finish is the “talc” effect that consists in applying a white patina in the wood pores. It is achieved by applying a basecoat followed by a coat of patina that is then removed and fixed in the wood pores, in the raised parts and in the frames. It is applied in eight steps: a basecoat, a coat of patina, sanding, finishing and sealing of the patina. Available in the colours shown below and in RAL and NCS sample colours.

Colours available

N° 500 White
N° 3376 Moon
N° 3416 Ecru
N° 3384 Hemp
N° 3405 Powder
N° 3383 Rope
N° 3155 Earth
N° 3849 Cream
N° 3851 Turtledove Grey
N° S6010/Y30R Beige-Grey
N° 3095 Grey
N° 3274 Smoky Grey
N° S4000-N Concrete
N° S7000-N Lead
N° 3824 Grey
N° 3162 Grey
N° 3066 Grey
N° S5010-G10Y Moss
N° S6010-R10B Plum

Open-pore stained ash

This finish sets off the grain of ash wood, magnifying it and showing off its streaked beauty. It is achieved by applying the stain that is then removed and fixed inside the ash wood pores. It includes six steps: spraying the stain, removal, shading, spraying the transparent basecoat, sanding, finishing.

Colours available

Natural
Elm
Ash
Slate
Tobacco
Cocoa
Terracotta
Peat

Summary of hinged and sliding doors

Hinged and sliding doors (h 240 / 260 / 290 cm)

David
David Specchi
David Traverso
David Traverso Specchi
Battista
Battista Traverso
Canone
Canone Traverso
Canone Traverso Specchi
Canone Terzo
Canone Terzo Specchi
Jazz
Telaio
Telaio +1
Telaio +2

Wooden Handles (For all smooth and ash hinged and sliding door arrangements)

"F13"

Length 140 - Thickness 35 - Boring 64 - Height 25

Ash

"F14"

Length 145 - Thickness 12 - Boring 128 - Height 20

Ash

“F25”

Length 250 - Thickness 12 - Boring 128 - Height 22

Smooth / Ash

"B"

Length 200 - Thickness 12 - Boring 160 - Height 29

Smooth

“BUC”

Length 118 - Depth 18 - Height 25

Smooth / Ash

Metal handles (For all smooth and ash hinged and sliding door arrangements)

“608”

Length 157 - Thickness 20 - Boring 128 - Height 32

Champagne

“Z03” (For sliding doors only)

Length 52 - Thickness 14 mm

Champagne

Cult classic

N° 00L White

Lacquered

The main feature of this finish is the silk-effect surface obtained by applying two coats: a base coat and a lacquered finishing coat. Available in all the sample colours.

Colours available

N° 21L Wool
N° 22L Ivory
N° 24L Yellow
N° 17L Green

N° 500L White

“White Style” laquered

A water-based finish, in matt lacquer (10 gloss units), it requires perfect sanding to obtain a smooth surface with a “velvety finish”. It includes three stages: primer, sanding, lacquered finish.

N° 33P Sand

Paint-brushed

What distinguishes this finish is the “paint brush strokes” effect surface created by skilfully applying a patina by hand with a brush over the lacquered finish. It is achieved in four steps: a basecoat, a lacquer finish, a coat of patina, sealing of the patina.

Colours available

N° 34P Yellow
N° 35P Blue
N° 31P Green
N° 32P Pink

Lacquers: sample colours

Our furniture is also available finished with RAL/NCS colours. Alternatively, it can match the colour samples provided by the customer.

N° 00S White

Soft touch

This is a clear, matt, reflection-free finish applied to lacquered surfaces. It feels very soft and is extremely resistant to scratches and to yellowing. The clear, soft-touch finish is applied after the surface has been lacquered in the desired colour.

Colours available

N° 21S Wool
N° 22S Ivory
N° 24S Yellow
N° 17S Green
N° 500S White Style

N° 60F Enamel

Fabric Effect

This finish creates a “combed fabric" effect that can be felt. it is achieved by using a brush to create a special “combed fabric” effect on the lacquer. Various coats of lacquer are applied and then removed from the edges, the raised parts and the frames to created an “aged” effect. It includes six steps: basecoat, lacquered finish, a coat of special fabric-effect lacquer, combing, aging, final coat of fixing varnish.